B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 246)

246 Airborne Enterprise CLI Reference Manual
wl-tx-power
Command wl-tx-power
Arguments [Integer]
Security
Level
3 (config)
Device Type All
Default 15 (dBm)
Description Set the transmit output power in dBm.
Range is 5 – 15.
wl-type
Command wl-type
Arguments a | p | u | m
Security
Level
3 (config)
Device Type All
Default a (infrastructure)
Description Configures the wireless interface operation type.
a Infrastructure mode. Used to configure the module as a client, which talks to an Access Point
p AdHoc mode. Used to talk peer-to-peer
u AdHoc mode with unique SSID generated (based on MAC address)
m Access Point. Used to operate as a WiFi cell master.
When using AdHoc mode, static IP addresses are required. If the module is configured as an Ethernet
Bridge, the wireless IP address (wl-ip) should match the IP address of the device connected to the
Ethernet port.