B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 122)

122 Airborne Enterprise CLI Reference Manual
dns-lookup
Command dns-lookup
Arguments [text string]
Security
Level
2 (data)
Device Type All
Default
Description Performs a DNS lookup using dns-server1 and dns-server2 as the primary and secondary DNS
servers. The input string may be the fully qualified URL or the IP address of the network node:
This command returns the IP address that was resolved by the DNS server or an error if not resolved.
Responds with the IP address of the URL in a text string format: xxx.xxx.xxx.xxx
dns-server1
Command dns-server1
Arguments [ASCII Text – IP Address XXX.XXX.XXX.XXX]
Security
Level 3 (config)
Device Type All
Default <0.0.0.0>
Description Configures the Primary DNS Server Address required for DNS lookups with the dns-lookup command.
If the DHCP Client is enabled, the dns-server1 value will be updated (if the DHCP Server provides
one).
Default is 0.0.0.0.
dns-server2
Command dns-server2
Arguments [ASCII Text – IP Address XXX.XXX.XXX.XXX]
Security
Level
3 (config)
Device Type All
Default <0.0.0.0>
Description Configures the Primary DNS Server Address required for DNS lookups with the dns-lookup command.
If the DHCP Client is enabled, the dns-server1 value will be updated (if the DHCP Server provides
one).
Default is 0.0.0.0.