B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 137)

Airborne Enterprise CLI Reference Manual 137
eth-dhcp-fbper
Command eth-dhcp-fbper
Arguments 0 | 1
Security
Level
3 (config)
Device Type Ethernet
Default 0
Description Enabling this will cause eth-dhcp-fbip, eth-dhcp-fbgateway, eth-dhcp-fbsubnet, dns-
server1
and dns-server2 to be saved to memory each time they change, making them persistent
across restarts and power cycles.
This command requires that eth-dhcp-fb and eth-dhcp-fbauto are enabled and that eth-dhcp-
acqlimit
is not 0 (zero).
0 Disables fallback persistence.
1 Enables fallback persistence.
The default setting is 0.
eth-dhcp-fbsubnet
Command eth-dhcp-fbsubnet
Arguments [ASCII Text – Subnet Mask]
Security
Level
3 (config)
Device Type Ethernet
Default 255.255.255.0
Description Defines the subnet mask applied when DHCP fallback configuration is used by the Ethernet port.
This setting requires that eth-dhcp-fb is enabled and the eth-dhcp-acqlimit is not 0 (zero).
The default setting is 255.255.255.0.