B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 135)

Airborne Enterprise CLI Reference Manual 135
eth-dhcp-fbauto
Command eth-dhcp-fbauto
Arguments 0 | 1
Security
Level
3 (config)
Device Type Ethernet
Default 0
Description Enabling this will cause the module to set the eth-dhcp-fbip, eth-dhcp-fbgateway, eth-dhcp-
fbsubnet
, dns-server1 and dns-server2 to their current values each time an IP configuration is
successfully received during a DHCP process.
0
Disables DHCP (Client) auto fallback configuration assignment on the
Ethernet interface.
1
Enables DHCP (Client) auto fallback configuration assignment on the Ethernet
interface.
Will store the settings for eth-dhcp-fbip, eth-dhcp-fbgateway and
eth-dhcp-fbsubnet, dns-server1
and dns-server2 for the DHCP
Ethernet IP configuration.
This command requires that eth-dhcp-fb is enabled and the eth-dhcp-acqlimit is not 0 (zero)
 If eth-dhcp-fbper is disabled the assigned configuration from eth-dhcp-fbauto
will not be persistent across restarts or power cycles.
The default setting is 0.