B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 117)

Airborne Enterprise CLI Reference Manual 117
del-eth-route
Command del-eth-route
Arguments [tcp | udp | icmp | bcast | all] [ip XXX.XXX.XXX.XXX] [port ]
Security
Level
3 (config)
Device Type Ethernet
Default
Description Deletes the rule matching the defined parameters from the current firewall rules. All parameters must
match for the rule to be deleted.
tcp|udp|icmp|bcast|all Selects the protocol for the rule.
ip xxx.xxx.xxx.xxx
Defines the public network address the rule applies to.
The xxx.xxx.xxx.xxx must represent a valid IP address,
where xxx is an integer between 0 and 255, and that the
resultant IP address is not 0.0.0.0.
port
Defines the port number for the rule.
The port number must be an integer.
The following provides details for each of the parameters:
icmp The rule impacts only ICMP traffic
tcp The rule impacts only TCP/IP traffic.
udp The rule impacts only UDP traffic.