B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 205)

Airborne Enterprise CLI Reference Manual 205
stop-bit / stop-bit-p1
Command stop-bit | stop-bit-p1
Arguments 1 | 2
Security
Level
3 (config)
Device Type UART | Serial
Default 1
Description Configures the number of stop bits to use on Serial port 1 (UART1).
Use of the –p1 suffix is optional.
stop-bit-p2
Command stop-bit-p2
Arguments 1 | 2
Security
Level
3 (config)
Device Type UART | Serial
Default 1
Description Configures the number of stop bits to use on Serial port 2 (UART2).