B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 224)

224 Airborne Enterprise CLI Reference Manual
wl-eap-advanced
Command wl-eap-advanced
Arguments basic | advanced
Security
Level
3 (config)
Device Type All
Default basic
Description Selects from a basic or advanced WPA/WPA2/EAP settings page.
basic Basic WPA/WPA2/EAP parameters are displayed.
advanced The entire list of WPA/WPA2/EAP parameters is displayed.
wl-fixed-rate
Command wl-fixed-rate
Arguments 0 | 1
Security
Level 3 (config)
Device Type All
Default 0
Description Transmits at only the selected data rate.
0 Disable the fixed rate transmit. Transmitter will use the best rate, up to the maximum.
1 Enable the fixed rate transmit.
wl-gateway
Command wl-gateway
Arguments [ASCII Text: Valid IP Address]
Security
Level 3 (config)
Device Type All
Default 0.0.0.0
Description Configures the static gateway IP address of the module‟s wireless interface if the DHCP Client is
disabled.
Must be ASCII text string with XXX.XXX.XXX.XXX format, where XXX can be 0-255.