Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 98)

Chapter 7. Configuring Units
86 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
Figure 43. Asterisks Next to Selected Drives
2 After all drives for the unit are selected, Tab to the Create Unit button and
press Enter .
3 On the Create Disk Array screen, make sure that the proper drives are
listed.
Figure 44. Create Disk Array screen
4 (Optional) Press Enter and type a name for the unit; then press Enter
again to set the name.
Tip: If you want to use all available drives, press Alt-A to select
them all.
Tip: You can also press Alt-C to choose Create Unit.