8001 enclosure fan error, 8002 enclosure fan removed – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 292
![background image](https://www.manualsdir.com/files/864341/content/doc292.png)
Chapter 12. Troubleshooting
280
3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
8001 Enclosure fan error
Event Type
Error.
Cause
Applies to 9750 and 9690SA controllers.
The enclosure fan is not functioning normally and may be blocked or
defective.
Action
Check that the fan or fans are not blocked. If a fan appears defective, replace
it as soon as possible.
For information on replacing a fan, see your enclosure documentation or
contact your enclosure manufacturer.
8002 Enclosure fan removed
Event Type
Warning.
Cause
Applies to 9750 and 9690SA controllers.
A fan has either been removed or has become unplugged.
Action
Replace or reseat fan and make sure it is operational. An insufficient number
of operating fans may lead to overheating of the components in the enclosure.
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)