Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 59)

Starting 3DM2 and Logging In
www.lsi.com/channel/products 47
Figure 24. Security Certificate Message from Browser
(You also can click Yes or Continue , in which case you will see this
message the next time you start 3DM2.)
If you are using a different browser, the steps to accept the certificate are
different.
3 When the 3DM2 logon screen appears, select whether you are a User or
Administrator .
4 Enter your password and click Login .
If you are logging in for the first time after installing 3DM2, the default
password for both User and Administrator is
3ware .
To log in to the 3DM2 web application, for Mac OS
1 You can start the 3DM2 web application in one of the following ways:
• In the Finder, choose Applications >> LSI , and then double-click
Connect to 3DM2.webarchive .
Your browser will open and go to the URL for 3DM2.
OR
• Open your browser and enter the URL for your system.
The default URL is https://localhost:888/
If remote access is enabled, you can also replace “localhost” with the
Hostname or IP address of the computer that contains the 3ware
controller. For example:
https:// : 888/
2 The first time you start 3DM2, your browser might prompt you for a
security certificate. If it does, accept the certificate.
Note: If you forget the passwords, uninstalling and reinstalling 3DM2
resets the passwords to 3ware .