beautypg.com

Highlights of the 10.2 release – Avago Technologies 3ware SAS 9750-16i4e User Manual

Page 14

background image

Chapter 1. Introducing the LSI 3ware SATA+SAS RAID Controller Card

2

3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2

Updated 3ware firmware.

Updated 3DM2 and CLI software.

Updated Windows drivers.

Highlights of the 10.2 Release

Version 10.2 of the 3ware RAID Software and Firmware provides the
following features and benefits to the 3ware 9750 model RAID controllers.

Support for 6 Gbps SATA+SAS RAID On-a-Chip devices available on
the 3ware 9750 RAID controllers, with continued support for the 3ware
RAID software feature-set.

Read cache settings let you enable either Basic Read Caching or
Intelligent Read Caching to improve performance.

Background task mode provides low latency settings to improve
performance in video and audio applications.

Enclosure alarm support allows you to turn off or mute audible alarms in
supported enclosures that provide alarms.

Advanced Content Streaming, a performance feature, provides increased
speeds for streamed data, such as video playback and editing, through
improved algorithms.

Rapid RAID Recovery increases the speed with which a degraded unit
can be rebuilt. It can also increase the speed of verification or
initialization that may occur in the event of an unclean shutdown.

Improved and simplified auto-verification and scheduling to help ensure
that your RAID units are verified on a regular basis.

Drive performance monitoring provides statistics to help trouble-shoot
performance issues.

Simultaneous RAID 6 parity generation to maximize RAID 6
performance.

StreamFusion™+ optimizes RAID 5 and RAID 6 disk accesses to
maximize application performance under heavy loads.

StorSave™ BBU with write journaling optimizes data protection and
performance.

Hot-swap and hot-spare for data availability.

RAID levels 0, 1, 5, 6, 10, 50, and Single Disk.

With the 9750 models:

PCI Express

®

x8 Gen 2.0

Ability to have SAS and/or SATA drives on the same controller (see
“Drive Requirements” on page 3)