Enable or disable 3dm2 command logging – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 75

Setting Up 3DM2 Preferences
www.lsi.com/channel/products
63
Enable or Disable 3DM2 Command Logging
1
Click
3DM2 Settings
on the 3DM2 menu bar.
2
In the
Server Configuration
section of the 3DM2 Settings page, select
either
Enabled
or
Disabled
in the
Command Logging
field.
Figure 29. Command Logging setting on 3DM2 Settings page
Note:
The command logging control in 3DM2 only determines whether or not
commands are logged from the 3DM2 interface. Command logging is also available
for configuration changes made through the CLI. However, control of whether CLI
command logging is enabled or disabled is handled separately. Changing the
setting within 3DM2 does not affect command logging from CLI.
For more information, see the 3ware SATA+SAS RAID Controller Card CLI Guide,
Version 10.2.
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)