Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 78)

Chapter 6. Configuring Your Controller
66 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
To see details about a controller in 3DM2
1 Start 3DM2 and log in as an administrator.
The 3DM2 Unit Information page appears, listing all of the 3ware
controllers installed in your system.
The right-most column of the list shows the status of each controller.
Figure 30. Controller Summary Page
2 To see more details about a particular controller, click the ID link for that
controller to display the Unit Information page.
To see information about a different controller in the 3DM2 pages
If you have more than one controller in the system, you can switch between
them by selecting the one you want from the
Select Controller drop-down
list at the right of the menu bar. This drop-down is available on all pages that
provide controller-specific features.
When you select a different controller from this list, the page in view changes,
to reflect the details for the controller you selected.
Tip: If you are managing controllers remotely, the list of controllers is
for the machine with the IP or URL you entered in the browser
address bar.
Tip: If you are managing controllers remotely, the list of controllers is for the
machine with the IP or URL you entered in the browser address bar.
Note: Throughout this documentation, the term current controller is used to refer to
the controller currently selected in this drop-down list.