Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 31

Basic Steps for Creating a Unit
www.lsi.com/channel/products
19
Figure 8. 3ware BIOS Screen
2
Press Alt-3 or 3 immediately to bring up the 3ware BIOS Manager
(3BM).
Normally your 3ware configuration remains on-screen for just a few
seconds. However, if a unit has degraded, the screen indicates the
problem and remains on your screen longer.
3
If you plan to make changes to your configuration and need to backup
data before continuing, press ESC and do so now. Otherwise, press any
key to continue.
Figure 9. Warning Message When you Start 3BM
4
If you have more than one 9750 controller in your system, a screen lists
the available boards. (See Figure 10.) In this case, highlight the board
with which you want to work and press Enter.
If you have more than four boards, you see only four at first (only four
can be processed at a time). After you exit from 3BM, you can access the
BIOS again, and access the next boards.
----Press
3ware ATA RAID Controller: 9750-4I
BIOS: BE9X X.XX.XX.XXX Firmware: FE9X X.XX.XX.XXX
BBU Status: Not Present
Number of online units: 1, available drives: 0, hot spare: 0, offline units:0
Available drives:
SATA - SAMSUNG HD160JJ 149.04 GB Phy 0
Exportable Units:Œ
3drive 64K RAID5 298.00 GB (Zygote3) DEGRADED
SATA - SAMSUNG HD160JJ 149.04 GB (Phy 3)
SATA - SAMSUNG HD160JJ 149.04 GB (Phy 1)
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)