Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 47)

Starting 3BM
www.lsi.com/channel/products 35
Figure 18. 3ware BIOS Screen
3 Press Alt-3 or 3 immediately to bring up the 3ware BIOS Manager
(3BM) .
Normally your 3ware configuration remains on-screen for just a few
seconds. However, if a unit has degraded, the screen indicates the
problem and remains on your screen longer.
4 If you plan to make changes to your configuration and need to backup
data before continuing, press
ESC and do so now. Otherwise, press any
key to continue.
If 3BM detects a degraded array, a red message box appears, to alert you
to the problem. For information about rebuilding a degraded array, see
“About Degraded Units” on page 138.
5 If you have more than one 9750 controller in your system, a screen lists
the available boards (see Figure 19).
Figure 19. 3ware Controller Board Selection Screen
If you have more than four boards, you see only four at first (only four
can be processed at a time). After you exit from 3BM, you can access the
BIOS again, to access the remaining boards.
----Press to access 3ware BIOS Manager ----
3ware ATA RAID Controller: 9750-4I
BIOS: BE9X X.XX.XX.XXX Firmware: FE9X X.XX.XX.XXX
BBU Status: Not Present
Number of online units: 1, available drives: 0, hot spare: 0, offline units:0
Available drives:
SATA - SAMSUNG HD160JJ 149.04 GB Phy 0
Exportable Units:Œ
3drive 64K RAID5 298.00 GB (Zygote3) DEGRADED
SATA - SAMSUNG HD160JJ 149.04 GB (Phy 3)
SATA - SAMSUNG HD160JJ 149.04 GB (Phy 1)