Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 177)

Scheduling Background Tasks
www.lsi.com/channel/products 165
Viewing Current Task Schedules
You can see the current schedules for background tasks on the Scheduling
page.
To view the current task schedule
1 Choose Management >> Schedule from the menu bar.
The Scheduling page appears, showing the schedule for Rebuild Tasks.
(Migration and initialization tasks follow the Rebuild Task schedule.)
2 To view Verify Tasks or Self-test Tasks, select it from the drop-down list
at the top of the page.
Figure 83. Selecting Task Schedules to View
Turning On or Off Use of a Rebuild/Migrate Task
Schedule
Turning on the schedule for Rebuild/Migrate tasks forces initializations,
rebuilds and migrates to be performed only during the time specified by the
schedule. If the schedule is not turned on, rebuilds, migration, and
initialization can happen whenever they are required or are manually started.
There may be times when you want to disable scheduled rebuild/migrate
tasks, so that you can rebuild or migrate a unit right away, without waiting for
the next scheduled time. In this case, you can disable the schedule, as
described below.