Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 218)

Chapter 11. 3DM2 Reference
206 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
Scheduled Rebuild/Migrates. You can enable or disable the schedule for the
Rebuild/Migrate tasks by selecting either Follow Schedule or Ignore
Schedule . When schedules are set to be ignored, these tasks can be
performed at any time, and are not restricted to the scheduled times.
Scheduled Verify Mode. You can select either Basic or Advanced verify
mode. Basic verify creates a once a week schedule. Advanced verify has
seven scheduling slots per week, similar to the Rebuild/Migrate schedule. For
more information, see “Selecting Advanced or Basic Verify Schedules” on
page 166.
Task Schedules
Initially, 7 schedule slots are defined, for 24 hours each. This means that even
if
Follow Schedule is enabled for Rebuild/Migrate or if Advanced is
selected for Auto-Verify, this schedule is equivalent to Ignore Schedule ,
because tasks can run at any time, round the clock.
A maximum of 7 slots can be created, so to set a different schedule, start by
deleting one or more of the existing scheduled slots, and then add new slots.
For step-by-step instructions for adding and removing schedules, and setting
schedules to be followed or ignored, see “Scheduling Background Tasks” on
page 163.