Configuring units, Configuring a new unit, Configuration options when creating a unit – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 91: Chapter 7, Chapter 7, “configuring units

www.lsi.com/channel/products
79
7
Configuring Units
This section includes information and procedures on configuring units
attached to your 3ware RAID controller. It is organized into the following
topics:
•
•
•
•
•
Changing An Existing Configuration by Migrating
(RAID Level Migration or Online Capacity Expansion)
•
•
•
Moving a Unit from One Controller to Another
•
•
•
Configuring a New Unit
When you configure a new unit, you specify some details related to the type
of RAID configuration that you want, and others that enable or disable
features.
This section first provides an overview of the different settings you can
specify during configuration and then provides step-by-step instructions for
creating a unit through both 3DM2 and 3BM.
Configuration Options When Creating a Unit
This section provides an overview of the choices you have when configuring
a new unit. For step-by-step instructions, see “Creating a Unit through
3DM2” on page 83 and “Creating a Unit through 3BM” on page 85.
When you configure a new unit, you specify the following:
•
Drives to be included in the unit
•
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)