HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 98)

98
3.6 Mac
h
ine Displa
y
Distance-to-go display (distance remaining in the current traverse command)
„ Bar graphic: Distance remaining in millimeters
„ Field below left: Actual position
„ Field below right: Distance to go
T display without tool life monitoring
„ T number of active tool
„ Tool compensation values
T display with tool life monitoring
„ T number of active tool
„ Tool life data
Quantity of workpieces/time per workpiece
„ Number of finished workpieces in this batch
„ Production time or current workpiece
„ Total production time for this batch
Load display
„ Load of the spindle motors/axis drives with regard to rated torque
D display (additive compensation)
„ Number of the active compensation
„ Compensation values
Slide display
„ Symbol appears in white: Disabled
„ Numeral: Selected slide
„ White background: No “converting and mirroring” active (G30)
„ Color background: “Converting and mirroring” active (G30)
„ Cycle status
„ Bar graphic: Feed rate override in %
„ Upper field: Feed rate override
„ Lower field:
„ Current feed rate
„ With stationary slide: Nominal feed rate (gray text)
„ Slide number on a blue background means the rear face is active
Cycle status:
Cycle on
Feed stop
Cycle off
Manual control
Inspection cycle
Set-up mode
Display elements