HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 673)

HEIDENHAIN CNC PILOT 4290 673
1
0
.2 D
a
ta T
ransf
er
Transfer via serial interface
Select “Serial” in the Transfer menu.
The CNC PILOT displays its own files in the left window and the
selected interface in the right window.
Define a mask to limit the number of files displayed.
Transmit files:
Mark the files you want to transfer.
Press the soft key. The CNC PILOT transfers the
marked files over the serial interface.
Receive files:
Press the soft key. The CNC PILOT changes to ready-
to-receive state and receives the transferred data.
Press the ESC key to return to the Transfer main
menu.
During serial transfer, first start the receiver and then the
transmitter.