HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 697)

HEIDENHAIN CNC PILOT 4290 697
1
1
.3 T
e
c
hnical Inf
o
rm
ation
11.3 Technical Information
Specifications
CNC PILOT 4290 – Specifications
Basic version Contouring control with integrated motor control and integrated inverter
„ 2 closed-loop axes X1 and Z1 on slide 1
„ 1 feedback-controlled spindle
Expandable to Maximum 10 control loops
„ Maximum 6 slides
„ Maximum 4 drives
„ Maximum 2 C axes
Components „ MC 420 or MC 422C main computer
„ CC 422 or CC424 controller unit
„ Operating panel
„ 15-inch TFT color flat-panel display with soft keys
Program memory Hard disk
Input resolution and display step „ Linear axes: 0.001 mm
„ B and C axes: 0.001 °
Interpolation „ Straight lines: in 2 principal axes, optionally in 3 principal axes
(maximum ±10m)
„ Circular arcs: in 2 axes (maximum radius 100 m)
„ C axis: interpolation in the linear axes X and Z with the C axis
„ Helical: superimposition of circular and straight paths
„ Look-ahead: precalculation of up to 20 blocks for determining the
contouring velocity profile
Feed rate „ Input in mm/min or mm/revolution
„ Constant surface speed
„ Feed rate with chip breaking
Data interfaces „ One each RS-232-C /V.24 and RS-422 / V.11 max. 38.4 kilobaud
„ Ethernet interface 100 Base T (approx. 2 to 5 megabaud, depending
on file type and network load)
„ USB 1.1 interface for connecting pointing (mouse) devices and block
devices (memory sticks, hard disks, CD-ROM drives)
Surrounding temperature „ Operation: 0 °C to +45 °C
„ Storage: –30 °C to +70 °C