HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 619)

HEIDENHAIN CNC PILOT 4290 619
8.1 T
o
ol D
a
tabase
Additional information:
„ Dialog box 3: see “Multipoint tools, tool life monitoring” on
page 620
„ see “Explanation of tool data” on page 622
„ see “Tool holder, tool mount” on page 624
Parameters in dialog box 2 G S TP
T hold. DIN: Type of tool holder – • –
T hold. heig. (wh): Height of tool holder – • –
T hold. brea. (wb): Width of tool holder – • –
Chck.di. (fd): Diameter of chuck – • –
Chck.he. (fh): Height of chuck – • –
Sali.lg.(ax): Salient length – • –
Pitch (hf): Thread pitch • – –
Threads per unit length (gb) for multiple threads – – –
Tooth type:
„ 0: Undefined
„ 1: Front face, straight
„ 2: Front face, inclined
„ 3: Lateral surface, straight
„ 4: Lateral surface, inclined
„ 5: Front face and lateral surface, straight
„ 6: Front face and lateral surface, inclined
„ 7: Special tooth type
– – •
Available: Physical availability – – •
Picture no. – • –
Cutting material – – •
CSP comp.: Compensation factor for cutting
speed – – •
FDR comp.: Compensation factor for feed rate – – •
Depth comp.: Compensation factor for cutting
depth – – •
Mount type • – •
Chuck: Where fd=0/fh=0, no chuck is displayed.