HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 455)

HEIDENHAIN CNC PILOT 4290 455
6.9 Help F
unctions
Digitizing
With the digitizing feature, you determine the input values using the
quadruple arrow (cross hairs) and transfer them to the input field.
TURN PLUS displays the coordinates of the cross-hairs position.
U Activate digitizing mode with the dialog box open.
U Position the cross hairs by arrow keys or touch pad.
U Exit the digitizing mode:
„ ENTER key: Values are applied.
„ ESC key: Values are not applied.
„ Change the zoom setting before calling the digitizing
mode if the increments of the cross hairs movements
are too small/large.
„ The values are taken over as absolute values of the
Cartesian coordinate system, independent from the
setting of the input fields.