HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 591)

HEIDENHAIN CNC PILOT 4290 591
7.
6 Mac
h
ining P
a
ra
met
e
rs
4 – Roughing
Roughing – Tool standards
Furthermore:
„ Roughing cycles are primarily executed with standard roughing
tools.
„ Alternatively, tools that allow full-surface machining are used.
Roughing – Machining standards
Tool standards
„ Tool angle – external/longitudinal [RALEW]
„ Point angle – external/longitudinal [RALSW]
„ Tool angle – external/transverse [RAPEW]
„ Point angle – external/transverse [RAPSW]
„ Tool angle – internal/longitudinal [RILEW]
„ Point angle – internal/longitudinal [RILSW]
„ Tool angle – internal/transverse [RIPEW]
„ Point angle – internal/transverse [RIPSW]
Machining standards
„ Standard/Full-surface – external/longitudinal [RAL]
„ Standard/Full-surface – internal/longitudinal [RIL]
„ Standard/Full-surface – external/transverse [RAP]
„ Standard/Full-surface – internal/transverse [RIP]
Input for RAL, RIL, RAP, RIP:
„ 0: Full-surface roughing cycle, including plunge-cutting.
TURN PLUS looks for a tool for full-surface machining.
„ 1: Standard roughing cycle without plunge-cutting