HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 643)

HEIDENHAIN CNC PILOT 4290 643
8.3 T
e
c
hnolog
y D
a
tabase
Cutting-value tables
Call the technology editor:
U Select “Tech(nology data)” in the Parameter mode.
Calling the cutting-value tables
Select “Tab. material.” The “List by materials” dialog box appears.
Specify the machining method and cutting material. The CNC PILOT
lists the technology data, sorted by material.
Select “Tab. cut material.” The “List by cutting materials” dialog box
appears.
Specify the material and machining method. The CNC PILOT lists the
technology data, sorted by cutting material.
Select “Tab. proc. type” (machining method). The “List by machining
method” dialog box appears.
Specify the material and cutting material. The CNC PILOT lists the
technology data, sorted by machining method.