HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 182)

182
4.1
1
Lat
er
al Surf
ace Cont
ours
Linear slot on lateral surface G311-Geo
G311 defines a linear slot in a lateral-surface contour.
Circular slot on lateral surface G312/G313-Geo
G312/G313 defines a circular slot in a lateral-surface contour
„ G312: Circular slot clockwise
„ G313: Circular slot counterclockwise
Parameters
Z Center (Z position)
C Center (angle)
CY Center as linear value; reference: unrolled reference diameter
A Angle to Z axis (default: 0°)
K Slot length
B Slot width
P Pocket depth (default: “P” from G308)
Parameters
Z Center
C Center (angle)
CY Center as linear value; reference: unrolled reference diameter
R Radius; reference: center point path of the slot
A Starting angle; reference: Z axis (default: 0°)
W End angle; reference: Z axis
B Slot width
P Pocket depth (default: “P” from G308)