HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 491)

HEIDENHAIN CNC PILOT 4290 491
6.13 Pr
epar
ing a Mac
h
ining Pr
ocess
Setting up tools
Select “Setting up > Tool list > Set up turret > Set up turret n.”
Select the tool location.
Entering the tool directly:
Press ENTER (or the INS key). The CNC PILOT opens the ““Tool”
dialog box.
Enter the ID number, define the relevant coolant circuits and close the
dialog box.
Select the tool from the database:
List the tools by type mask or
List the tools by ID number mask
Place the cursor on the nominal tool.
Insert the tool.
Press the ESC key to exit the tool database.
Adjust the coolant circuits in the “Tool” dialog box.