HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 506)

506
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Roughing hollowing – neutral tool (G835)
The IWG generates the cycle G835 for the selected contour area.
“Roughing” soft keys
Longitudinal/constant oversize
FD relief turn machining
E and F undercut machining
G undercut machining
H, K and U undercut machining
Parameters
P Cutting depth (maximum infeed)
A Approach angle – reference: Z axis (default 0°/180°)
W Departure angle – reference: Z axis (default 90°/270°)
X Cutting limit
Z Cutting limit
I Depending on the soft-key setting:
„ Longitudinal oversize
„ Constant oversize (generates “Oversize G58” before the
cycle)
K Transverse oversize
Plunge-cutting (machine descending contours)?
„ Yes
„ No
E Reduced plunging feed rate with descending contours
Bidirectional machining
„ Yes: Machining using cycle G835
„ No: Machining using cycle G830
Q Type of retraction at end of cycle
„ Q=0: Returns to starting point (first Z, then X direction)
„ Q=1: Positions in front of the finished contour
„ Q=2: Retracts to safety clearance and stops
Undercut machining. The setting is made by soft key.