HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 132)

132
4.3 The DIN PLUS Edit
o
r
DIN PLUS words:
U Select “Instr. > DIN PLUS words.” The editor opens the selection
box.
U Select the desired section code, instruction for program structuring
or the input/output command.
Variable:
U Select “Instr. > Variables.” The editor opens the input line.
U Enter a variable or mathematical expression.
Skip level:
U Select “Instr. > / Deletion.” The editor opens the “Skip level” dialog
box.
U Enter skip level [1 to 9].
Slide code:
U Select “Instr. > $ Slide.” The editor opens the “Slide number”
dialog box.
U Enter the slide number. Enter several slides as a sequence of
numbers.
External subprogram call:
U Select “Instr. > L call external.” The editor opens the selection list
with the available subprograms.
U Select the desired subprogram and enter the transfer parameter.
Internal subprogram call:
U Select “Instr. > L call internal.” The editor opens the “subprogram
call” dialog box.
U Enter the subprogram name (block number with which the
subprogram begins) and the transfer parameters.
Comment:
U Select “Instr. > Comment line.” The editor opens the input line.
U Enter text. The comment is inserted above the position of the
cursor.
Templates:
U Select “Instr. > Template selection > Template selection ...”
„ The editor opens the dialog box of the template
„ After the dialog box is closed the template is taken into the NC
program
Creating and NC program overview:
U Select “Instr. > Working plan.”
U The editor
„ collects all comments that begin with “// ...”
„ places these comments in the MACHINING section