HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 580)

580
7.
4 Contr
o
l P
a
ra
met
e
rs
Control parameters for machine display
24 Simulation: Color table for feed travel
The feed travel of a tool is displayed in the color assigned to the respective turret location.
Evaluation: Simulation mode
„ Color for turret position n (n: 1..16) – Color code:
„ 0: Light green (standard color)
„ 1: Dark gray
„ 2: Light gray
„ 3: Dark blue
„ 4: Light blue
„ 5: Dark green
„ 6: Light green
„ 7: Dark red
„ 8: Light red
„ 9: Yellow
„ 10: White
27 Simulation: Settings
Evaluation: Simulation mode
„ Path delay (machining): The machining simulation and the control graphics (TURN PLUS) are delayed by the
“path delay” time after each path that has been simulated graphically. The simulation speed can thus be
influenced.
Smallest unit: 10 msec
Parameters for simulation
Parameters for machine display
301..306,
313..318, .. Display type 1..6 manual control
The machine display consists of 12 configurable fields (see tables below).
307..312,
319..324, .. Display type 1..6 automatic
The machine display comprises 12 configurable fields (for arrangement, see table below).
„ Symbol, field n (n: 1..16): Code number of the “symbol” (for code numbers, see following pages).
„ Slide / Spindle: Slide, spindle or C axis to be displayed. The CNC PILOT automatically distinguishes between
slide, spindle and C axis.
„ 0: The component selected by slide/spindle-change key is displayed.
„ >0: Slide, spindle or C-axis number
„ Component group: Always enter 0.