HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 509)

HEIDENHAIN CNC PILOT 4290 509
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Recessing radial/axial (G866)
The IWG generates the cycle G866 for the form elements “Recess
type D” (sealing ring) and “Recess type S” (guarding ring).
If an oversize has been specified, TURN PLUS first rough-machines
and then finish-machines the recess.
The dwell time is taken into account:
„ Only for finishing, if the oversize is defined
„ For each recess, if the oversize is not defined
Parameters
I Oversize (longitudinal and transverse)
E Dwell time