HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 513)

HEIDENHAIN CNC PILOT 4290 513
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Parting and workpiece transfer
For parting with workpiece transfer, TURN PLUS activates an expert
program from machining parameter 21. Which expert program is
activated depends on the spindle entries specified for “1st setup ..”
and “2nd setup ..” in the program head:
„ Same spindle (manual rechucking): Entry from “SP-ABHAND.”
„ Different spindles (workpiece transfer to opposing spindle): Entry
from “SP-UMKOMPLA.”
Process of parting and workpiece transfer:
U Select the vertical element at which the workpiece is to be parted.
TURN PLUS opens the dialog box of the expert program.
U Check/edit the parameters.
U TURN PLUS executes the parting operation.
U Define the chucking data and position for the second setup.
U Check/edit the “workpiece transfer” parameters.
U TURN PLUS transfers the workpiece.
Expert programs are provided by the machine tool builder.
Refer to the machine manual for the meanings of the
parameters and the sequence of the program.