Cycles for turning – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 719
HEIDENHAIN CNC PILOT 4290
719
Ov
erview of G Commands in the MA
CHINING Section
Cycles for turning
Tool-tip radius compensation (TRC/MCRC)
Tools, types of compensation
G40
Switch off TRC/MCRC
T
Insert the tool
G41
TRC/MCRC, left
G148
(Changing the) cutter compensation
G42
TRC/MCRC, right
G149
Additive compensation
Zero point shifts
G150
Compensate right tool tip
Overview: Zero point shifts
G151
Compensate left tool tip
G51
Relative zero point shift
G710
Adding tool dimensions
Turning—Basic functions
Turning—Basic functions
Turning—Cycles
Turning—Cycles
Simple turning cycles
Contour-based turning cycles
G80
End of cycle
G810
Longitudinal roughing cycle
G81
Simple longitudinal roughing
G820
Face roughing cycle
G82
Simple face roughing
G830
Contour-parallel roughing cycle
G83
Contour repeat cycle
G835
Contour-parallel with neutral tool
G85
Undercut
G860
Universal recessing cycle
G86
Simple recessing cycle
G866
Simple recessing cycle
G87
Transition radii
G869
Recess turning cycle
G88
Chamfer
G890
Finishing cycle
Drilling cycles
Thread cycles
G36
Tapping
G31
Thread cycle
G71
Simple drilling cycle
G32
Single thread cycle
G72
Boring, countersinking, etc.
G33
Single thread cut (Thread single path)
G73
Tapping cycle
G933
Thread switch
G74
Deep-hole drilling cycle
G799
Thread milling, axial
Page 278
G800
Thread milling in XY plane
G806
Thread milling in YZ plane