HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 290)

290
4.28 Assignment, S
y
nc
hr
onization, W
o
rk
piece T
ransf
er
Example of tailstock function
As of software version 625 952-04:
Check whether the end point is reached:
„ G916 D3
„ On reaching the fixed stop, the CNC PILOT stops the slide and
saves the stop position in the variables V901 to V918.
„ If the fixed stop is not reached, the CNC PILOT completes the
programmed path of traverse and enters the error number 5519
in variable V982.
. . .
$2 N.. G94 F800
$2 N.. G0 Z20 Pre-position slide 2
$2 N.. G916 H250 D1 G1 Z-10 Activate the tailstock function—contact force
250 daN
. . .
$2 N.. G916 D2 G1 Z100 Deactivate the tailstock function and retract the
tailstock
As of software version 625 952-04:
Lag error monitoring is not activated until the acceleration
phase has been completed.