HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 46)

46
2.1 User Int
e
rf
ace
2.1 User Interface
Screen displays
1 Operating mode bar: Shows the status of the operating modes.
„ The active mode is shown with a dark-gray background.
„ Programming and organization operating modes:
„ The selected mode of operation is shown at right next to the
symbol.
„ Additional information such as the selected program,
submode, etc. are shown below the operating mode
symbol.
2 Menu bar and pull-down menu enable you to select functions.
3 Working window: Size and content depend on the operating
mode.
4 Machine display: Shows the current status of the machine (tool
position, the cycle and spindle situation, active tool, etc.). The
machine display is configurable.
5 Status bar
„ Simulation, TURN PLUS: Displays the current settings or
information on the next operating steps.
„ Other operating modes: Displays the most recent error
message
6 Calendar date and service “traffic light”
„ Date and time
„ A colored background signalizes an error or a PLC message.
„ The “traffic light” indicates the maintenance status of the
machine.
7 Soft-key row: Shows the current meaning of the soft keys.
8 Vertical soft-key row: Shows the current meaning of the soft
keys. For more information: see the machine manual.