HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 489)

HEIDENHAIN CNC PILOT 4290 489
6.13 Pr
epar
ing a Mac
h
ining Pr
ocess
Collet chuck parameters
Parameters for face drivers (“without chuck”)
Parameters
ID number chuck
Clamp diameter
Free length (distance between front edge of collet and right edge of
blank)
Clamping pressure
The entry is transferred to the program head. TURN PLUS does not
evaluate this parameter.
Parameters
ID number
Indentation depth
Approximate depth to which the grippers press into the material.
TURN PLUS uses this value to position the face driver graphics.