Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 73)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 73
FANUC CNC Configuration
Chapter 3
Device Logic Modules
These pre-defined modules require no modifications to interact with the supervisory PLC and ControlLogix
AOP as described in the following chapters.
If additional functionality is desired, FANUC and Rockwell Automation have provided an open architecture
that can be used. Refer to the documents in
What You Need on page 47 for the specific details of the
EtherNet/IP feature.
1. Review the logic modules in the
folder tree.
2. Double-click the files to open the
logic for review.
IMPORTANT These modules are mandatory for the EtherNet/IP communication between the CNC and the PLC.