Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 177)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 177
FactoryTalk View ME Configuration
Chapter 5
Configure Goto Display Buttons on Startup Display
The Goto buttons on the main startup screen that are used for launching the FANUC CNC faceplates use a
special Goto button that is different than standard device Goto buttons that are included in the startup screen.
The CNC Goto buttons includes a CNC status multi-state indicator directly on the button. For the CNCs in
your application you must replace the default device Goto buttons with the CNC Goto buttons. First you add
the Goto button graphics and objects to your application. Then you place and associate the individual Goto
display buttons to the appropriate faceplate and specific parameter file.
Add FANUC CNC Goto Buttons to Your Application
1. Right-click Display and choose Add Component Into
Application.
2. Browse to C:\Program Files\RA_Simplification\
CMAT\A-Files\5-HMI\ME\HMI Modules\
01_Machine\ME_GoToButtons.
3. Select the Goto_FanucCNC.gfx file and
click Open.
The selected display appears under
Displays in your application.