Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 262)

262 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Appendix D
Logix Communication and Controller Configuration
Verify Your IP Address
1. From the Start menu, choose Run.
The Run dialog box opens.
2. Enter cmd.
3. Click OK.
The Windows IP Configuration dialog
box opens.
4. Enter ipconfig at the prompt.
5. Press Enter.
6. Verify that the IP address and
Subnet Mask match what you
entered.
If these numbers do not match
what you entered, contact your
network administrator.
7. Close the cmd.exe window.