Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 32)

32 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 2
System Layout and Wiring
1. Create a project folder.
For the CNC Work Cell
example, the
CNC_Work_Cell folder was
created.
2. Browse to the CNC CAD
Drawing Library on the
CNC toolkit DVD and
select the DWG Format
Drawings, DXF Format
Drawings, or PDF Format
Drawings directory.
Each drawings directory include these files in their respective
files formats.
All drawings are associated with the FANUC CNCs, with the
exception of these three drawings:
• The 07_PLC_1791DS_IB16 and
11_PLC_1791DS_IB4XOW4 drawings are examples of
Rockwell Automation Guard I/O showing the safety I/O
interface with the FANUC Dual Check I/O.
• The 15_CNC_Ethernet_Communication drawing includes
an example of EtherNet/IP communication with the
Rockwell Automation GuardLogix controller, PanelView
Plus, and Kinetix/PowerFlex drives.