Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 86)

86 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 4
GuardLogix Configuration
For the CNC Work Cell example, the path is:
C:\Documents and Settings\
PCName\My Documents\DMAT\CNC_Work_Cell\CNC_Work_Cell.
5. From the Revision pull-down menu, choose
the version of RSLogix 5000 software to
import into.
6. Click Import to save and open the project
as an ACD file.
After the import process is complete, the
project opens and the controller organizer
displays all of the preconfigured project
components including the controller,
network, device configurations, the
preconfigured logic program files and the
faceplate and control AOI files.
Because the DMAT Wizard created a
project with a controller, network
module, and Machine Module logic, go to
FANUC CNC AOP Configuration on
page 95
.
IMPORTANT Your RSLogix 5000 software must be version 20.0 or later to use the FANUC CNC AOP.