Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 23)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 23
Architecture and Hardware Selection
Chapter 1
2. Click continue to leave the links as
they are. The multiplier pop up
window will then be displayed.
3. Add the multiplier that has been
approved by FANUC, and then click
OK. You are now ready to begin
creating the bill of materials (BOM).
Create CNC System Bill of Materials
1. Select the CNC model, and display
options.
a. Use the tabs near the bottom of the
spreadsheet to navigate to and
select the appropriate CNC model,
based on your machining
requirements.
For the CNC Work Cell example, a
35i-B CNC is selected.
The 35i-B tab is displayed.