Create supervisory, Controller and safety, System bill of materials – Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start User Manual
Page 28
28
Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 1
Architecture and Hardware Selection
b. Type a new BOM project file name.
By creating a new BOM project file
specifically for your application, you
preserve the initial toolkit file for
future reference.
In this example, the file was named
CNC_Work_Cell_BOM.
6.
Repeat
…
for each CNC in
your system.
The BOMs can now be submitted to
FANUC for purchase. We recommend that
your local FANUC representative review
and approve the configuration prior to
purchase.
Create Supervisory Controller and Safety System Bill of Materials
Refer to the Drives and Motion Accelerator Toolkit for creating a supervisory controller bill of materials that
includes Rockwell Automation Kinetix or PowerFlex drives. For a copy of the DVD, contact your local Rockwell
Automation distributor or sales representative.
•
Drives and Motion Accelerator Toolkit DVD, publication
.
Refer to the Safety Accelerator Toolkit for creating a safety system bill of materials that includes Rockwell
Automation GuardLogix controller and Guard I/O.
•
Safety Accelerator Toolkit DVD, publication