Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 14)

14 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Preface
You can view or download publications at
http://www.rockwellautomation.com/literature . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Additional Toolkits and FANUC Publications
This table provides information for supporting toolkits and FANUC
publications.
You can request the FANUC publications by contacting your local
FANUC America distributor or sales representative.
http://www.FANUCfa.com/us-en/Home
CIP Motion and sercos
SERCOS and Analog Motion Configuration and Startup User Manual,
publication
MOTION-UM001
Information on configuring and troubleshooting your ControlLogix
and CompactLogix sercos interface modules
CIP Motion Reference Manual, publication MOTION-RM003
Provides descriptions of the AXIS_CIP_DRIVE attributes and
RSLogix 5000 software Control Modes and Methods
CIP Motion Configuration and Startup User Manual, publication MOTION-UM003
Information on configuring and troubleshooting your ControlLogix
and CompactLogix EtherNet/IP network modules
Online Configuration and Selection Tools
Rockwell Automation Configuration and Selection Tools, available at
http://www.rockwellautomation.com/en/e-tools/
These online tools install on your personal computer so that you can
quickly access information on our products:
• CrossWorks™
• Industrial Computer Selector
• Operator Interface Selection Tool
• Programmable Controller Family Selector
Table 1 - Additional Resources (Continued)
Resource Description
Toolkits and FANUC Publications Description
Drives and Motion Accelerator Toolkit DVD, publication IASIMP-SP017 Toolkit for sercos interface or EtherNet/IP-based motion control
Safety Accelerator Toolkit DVD, publication SAFETY-CL002 Toolkit to provide a framework for developing safety applications.
FANUC Series 30i/31i/32i/35i -MODEL B, EtherNet/IP Adapter function,
publication B-64014EN/04-2 Information on configuring and troubleshooting your FANUC CNC's
EtherNet/IP network modules.
FANUC Series 30i/31i/32i/35i -MODEL B, FANUC Power Motion i -MODEL A,
EtherNet/IP Scanner function, publication B-64014EN/04-3 Information on configuring and troubleshooting your FANUC CNC's
EtherNet/IP network modules.