Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 109)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 109
GuardLogix Configuration
Chapter 4
3. Click .
The String Browser dialog box opens.
4. Enter the name of the associated application
or device module.
This string name is used within the alarm
history messages providing the fault origin.
5. Click OK.
The string tag value field updates with the name you typed in. For the CNC Work Cell application
example, the value is Gantry.
6. Repeat step 1 … step 5 for each application status (UDT_AppStatus) tag and device status
(UDT_ModuleStatus) tag within the Controller Tags of your project.
For the CNC Work Cell application example, these application and device string tag names were entered.
Machining Example
Drill CNC Example