Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 102)

102 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 4
GuardLogix Configuration
5. Enter the name for your initial
CNC application in the Final Name
field.
For the CNC Work Cell
application example, the Final
Name is P03_Machining.
6. Click Tags within the Import
Content organizer.
The Configure Tag References
dialog box opens.
7. Replace the _ApplicationName and
_MachineName with the desired tag
names of your application and
machine.
For the CNC Work Cell application
example, Machining was entered as
the ApplicationName and
CNC_Work_Cell was entered as
the MachineName.
8. Click OK.
The new application program
appears in the Controller Organizer
within the Main Task folder.