Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 226)

226 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 7
System Application Guide
Online Help Views
Press the Help button on any view to access the online help information.
Motion Drive and/or PowerFlex Drive Faceplates
For motion drive and/or PowerFlex drive faceplates, refer to the System Application Guide chapter of the Drives
and Motion Accelerator Toolkit Quick Start, publication
IASIMP-QS019 .
Guard I/O Safety Faceplates
For Guard I/O safety faceplates, refer to Safety System Application Guide chapter of the Safety Accelerator
Toolkit Quick Start, publication
IASIMP-QS005 .
Equipment Status Display Overview
The Equipment Status faceplate files let you quickly load and configure a summary display of preconfigured
status and diagnostic displays or faceplates for FactoryTalk View Machine Edition. The Equipment Status
faceplate works in conjunction with individual device faceplates and provides a single summary display of all the
faceplates that may be configured for an application. You can configure up to nine device faceplates to run with
the Equipment Status faceplate and you can launch each device faceplate directly from it.
In this example, the CNCs from the CNC Work Cell application example were added to the Equipment Status
display. Click the device buttons to open the associated device faceplates.
Online Help
Example