Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 19)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 19
Architecture and Hardware Selection
Chapter 1
Review System Selection and Configuration Tools
This section provides and overview of the FANUC and Rockwell Automation system selection and
configuration tools that you may need for your FANUC configuration.
FANUC CNC Express Software
The Excel workbook CNC Express Order
Forms.xls contains the product information
and the actual order forms. Each worksheet
represents a certain product and contains the
relevant order guide information for the
product selections offered in that worksheet,
and is followed by the order form. To order
from this workbook, you make simple product
selections by using check marks, and the
workbook does the rest of the work.
Rockwell Automation DMAT Wizard Software
The Drives and Motion Accelerator Toolkit
(DMAT) Wizard software provides a
streamlined way of creating a bill of
material, assembling a system drawing set,
and creating a RSLogix 5000 project file
with a preconfigured controller, network,
drives, and initial system program logic.
This can be accomplished in minutes by
inserting simple system and drive
configuration entries, and running other
system selection tools as needed.
You can access this software tool on the
Drives and Motion Accelerator Toolkit
DVD, publication
IASIMP-SP017 .