Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start - Manual (Page 34)

34 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
Chapter 2
System Layout and Wiring
Edit FANUC CNC Drawing Set
These steps provide general instructions for how to maximize the use of the toolkit’s drawing library in creating a
complete CNC system layout and wiring drawing set. We recommend AutoCAD or AutoCAD Electrical
software to take full advantage of the drawing editing steps and the library’s device wiring references and
attributes that move with the devices as you edit your project drawing set. Some of the initial project creation
steps are illustrated by using AutoCAD Electrical software, but most are generic and can be used with a variety of
software drawing packages.
Create a New Project
1. Open your drawing software.
2. Create and name your new project.
3. Add and select the toolkit library drawings
you copied in the previous section.