Before you begin, What you need, Before you begin what you need – Rockwell Automation IASIMP Computer Numerical Control (CNC) Machining Accelerator Toolkit Quick Start User Manual
Page 149
Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012
149
FactoryTalk View ME Configuration
Chapter 5
Figure 27 - Device Faceplate Display Example (continued)
Before You Begin
•
Complete your system architecture and hardware selection (refer to
).
•
Complete your system layout and wiring (refer to
•
Complete your FANUC CNC Configuration (refer to
).
•
Complete your logic configuration (refer to
).
What You Need
•
The CNC Machining Accelerator Toolkit DVD, publication
. For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative.
•
FactoryTalk View Studio software, version 6.0 or later.
•
If Rockwell Automation Kinetix or PowerFlex Drives are used in the system, the Drives and Motion
Accelerator Toolkit DVD, publication
, can be used to significantly streamline FactoryTalk
View ME configuration. For a copy of the DVD, contact your local Rockwell Automation distributor or
sales representative.
Equipment Status Faceplate Display
Alarm History Faceplate Display
The Alarm History display provides time and date
stamped machine and device faults and alarms.
This display is sized for use in PanelView Plus 700
or larger terminals.
This Equipment Status display provides a summary
status of the devices in your system and a launch site
for your individual device faceplate displays.
This display is sized for use in PanelView Plus 700
or larger terminals.